Also try to disconnect webcam or printer! Tried running heimdall command line to see if it gives me more info. Here's what I got: Beginning session MODEM upload failed! I got to ask - If you are using Odin to revert back to stock JFD did you make sure the partition box is checked? Yes, it's checked. I had the same problem. Always stuck on modem.
Search my post. Related [Q] Help me restore to stock settings I have a little problem and could use some help. I was running superclean 2. Well this time my screen went blank on the Odin was stuck on param. When i disconnected my phone it now boots to the screen with a phone, exclamation point and a computer. I closed Odin restarted my computer and tried again with the same result. I can still access the download mode and CWM.
When I try to complete a nandroid restore the phone goes through the whole process and then when I click to reboot I get the same screen as above. My next step was to download DI01package3. I tried pushing this with Odin and it got stuck on sbl. Please help me get my phone back. As you have unfortunately discovered, Odin is unreliable. Try to use Heimdall by following the instructions in this thread.
Could be your download was corrupted? I downloaded all the files and was able to install the Samsung composite usb driver and then launched heimdall-frontend and I can check the box and use the pit file I installed, but the tar. OK i figured out how to extract the. WEll I kept on entering download mode and reloading the values for frontend and finally it worked.
Thanks for the help, greatly appreciated! No its time to try to get the community rom loaded. I've been spending the past week reading all the posts Thanks for all the information , and I thought I had everything down, however I wasn't expecting to get the Blue Screen of Death right when I decided to start flashing with Odin. I was using Odin 1.
When it first occurred, I left the cable in there, and decided to uninstall the drivers, and downgrade to a version that was available from a post on XDA. However, now the problem seems to be that I keep on getting unknown device as the device is still stuck in downloading mode. I was reading some instances where some people were just able to continue after the BSOD, however I'm not so lucky. What should I do now? I'm afraid to do anything to my phone, and I hope I can figure something out before my battery runs out.
Thanks in advance for any help. The 1. Any earlier version is probably fine also, but you will need to reboot the computer after uninstalling, then reinstall and reboot your computer again. Win7 x64 is fine also, and Odin3 v1. You didn't say if you got the BSOD on the pc or on the phone. It is usually a term that is associated with windows on the pc.
You also didn't say if the Odin flash completed and if you got a pass or fail. At this point you need to pull the battery to turn the phone off, and start over. Make sure you have a good install of the usb driver, with reboots as above.
If the phone boots up normally, then you're back in business. If you can't get into recovery, or if you get recovery but the phone does not boot up normally, you need to flash again. Enter download mode and do the flash again. How to use stand-alone Odin3 to flash firmware: Follow and recheck each of the following steps.
Do them in order listed, as some steps are dependent on previous steps. Enter Code: adb reboot recovery 4. Share Share Tweet Email. Nate Kimmey Articles Published. Read Next in software. Don't expect Google to launch a new Pixelbook until at least Still using a Google Pixel 2 or Pixel 3?
Net 4 Framework. Download and install the Samsung Drivers. Download the One Click Rooting program for your specific phone and extract it to somewhere on your computer. Samsung Captivate One Click Root. Samsung Vibrant One Click Root. Great work on the program!
I have the latest version linked here and it has the unroot option you added built in. Let me know if you would like me to change anything about the procedure. The Drivers take forever to install. I have been waiting at least an hour now and almost half way.
I could not even take the path you took to get to the setup. I never even found the setup. On menu, I have apply sdcard:update. Same problem!! If you want you can add the I to the list. It will do 2. Rooting to 2. I was getting this also. Once I set USB debugging and unmounted it went fine. Seems if you set USB mount then it does not work. This is stated in the video but very briefly and I missed it twice before I caught it. So I followed the steps and when I selected reinstall packages its said that it could find update.
I checked to make sure USB debugging is on, and it is. Unfortunately the program is for Windows only I believe. No boot camp on your mac? Or a friend with a Windows PC you could use real quick only takes 10 minutes then you dont need a computer again.
From my understanding, this root method does not unlock the bootloader, which means you do not void the warranty. My question is, what are the pros and cons of unlocking the bootloader, besides the fact that you void the warranty i dont really care about my warranty.
For those of you having issues with the update. Make sure your drivers in windows are setup correctly. Open up a CMD window in my directory. There is another method on XDA that just was written. Its an app for your phone that will root you but it is still being tested and does not unroot.
Thanks a million!! One Click Root is awesome. Thanks so much M8! We all waiting for CM6 to be release for are Galaxy S, but in the mean time I found this amazing app One Click Lag Fix they will make your phone much more faster and they will fix the lag.
I never thought possible that simple app could leave my phone so fast. I also had problem with no update. I downloaded update. Hope this helps. I am very much new to Android OS. This page is very informative now i understand that its very much easy to root the mobile. But one thing to ask u guys. As per i know custom rom is the Operating System which is already installed in our gadget. Tethering and Remove preloaded application is my main criteria. Also there are not separate versions anymore, the new version supports.
Vibrant, Captivate, I and IM from the same app. Please click on Wireless at the top of the site, then Android then on the Rooting, Jailbreaking, and Unlocking guide and it will explain everything.
Hy I would like to know if the captivate must be conected to de pc after the rooting ond the pc has finished. I mean when y have to select reintal packages on the phone, the phone must stay conected, disconected? Hey when i download the net framework 4 setup it says blocking issues, You must install the bit Windows Imaging Component WIC before you run Setup…well when i go to download this it gives me a bunch of files..
My phone wont reboot into recovery mode, not sure why but ive followed all the steps above, any ideas? Are there any updated drivers for the Samsung? I downloaded the drivers that were linked and my computer goes to install them, but ends up saying that it cannot install the drivers. Dell Inspiron Windows Vista I have T-mobile Vibrant with 3 key locked, and I followed all the instruction to root it and install a new rom.
I found that the update. I tried to fix it by copying update. I waited for about 10 minutes and removed the battery. I was able to root my Captivate with no problem.
The instructions are quite clear. I got the little Superuser Permission app icon. How do I get rid of it for good? Also, is it safe to keep the phone rooted all the time?
The best way to go is flash a custom recovery image then use it to flash a custom rom the custom roms have speed tweaks and crappy att apps removed etc.
Unlike with root access on a regular linux system, we root and install a separate app called Superuser Permissions. What that program does is notify you if anything asks for root access then you have to give it permissions to allow the app to use root otherwise it blocks it. So no worries about leaving it rooted.
That will bring up a number of apps made specifically for that purpose. If o root my captavait will it let the battery last longer and make it able to make the ringer louder please email me any one and let me know love2havefun yahoo.
Please please please can somebody help me? This sucks!!! It keeps telling me that the driver is unable to run on my pc. I have an updated windows vista pc and neither one of the drivers seem to work. Where do I go from here? Any suggestions? What am I doing wrong? I have everything installed, net version 4, the driver software, and the one click root,.. I also have debugging mode ON What am I doing wrong? Please help, thanks.
I have read other reports similar to this and that was the suggestion that had the highest success rate. Can i still use this one click root on a Samsung Captivate that has the leaked 2.
Every update. Wait, the 2. I think he meant the latter. Awesome, very easy to do!! I researched a lot of links and this was as straight forward and simple as it gets!
I have got T mobile simlock on my vibrant and to get it unlocked i have to root as far as i know. I have been trying for a long time till i got your video. But i have one and final problem though. It works fine till the blue cmd window appears press any key to continue but i cant see recovery mode on my device.
I dont have SD card on my mobile. Do one has to have SD card for rooting? Rooting a TMobile Valiant. When I click the one click root button, I get an error message as follows: Unhandled exception has occurred in your application.
If you click continue, the app will ignorre this error an attempt to continue. If you click Quit, the app will close immediately. Great Video…. My captivate IS rooted super user app, successfully downloaded titanium backup and rom manager , and appears to be working…. I downloaded the sumsung drivers but you said i need to double click on setup. It seem that everythings else is there but the setup , also once i downloaded the file i was on able to extract.
I went and install everything done the whole procedure only thing i recieved was the superuser icon.. This method worked perfect…thank you. Kept retrying…kept getting same thing…. I used the Captivate rooter. Gave me the E: Signature verification failed installation aborted. I tried the Galaxy-S-one-click-root-all-models — same error. What did I do wrong? You are amazing thank you so much, was fastest root i have ever done, G1, Flipside, and Captivate are the 3 I have done, G1 took 3 hours, Flipside took 10 min, and this was done before your video was.
Still no luck rooting my phone if you can help me it will greatly appreciated. I have a vibrant that i rooted a couple of months ago. A week or so after rooting i noticed that my usb connection was a bit off. If i unplugged the charger, the battery icon would look like i was still charging the phone.
I pulled mine from the java web start app from HP and renamed it. It works and I got it before that other link was available. I don't post anything without trying it first. I had a different kernal plus a large amount of patches. No it doesn't have to be stock. Just make sure you have all the necessary drivers installed. And the palm webos sdk. Installed yesterday and now loving the android option on this. Desire Android Develop Galaxy Player 4.
Xperia P, U, Sola, Go Xperia Miro, Tipo Dua Xperia Z Android Devel Galaxy S 4 Developer D T-Mobile Samsung Galax Samsung Galaxy S 4 Uni T-Mobile G2 Original A Tegra Note 7 Android D Xperia Z1 Compact Andr Galaxy Tab Pro Xperia Z2 Original And T-Mobile One M8 Orig G Pad Verizon Motorola Droid Galaxy Grand Prime Ori G4 Original Android De Moto G Original A Verizon Galaxy S6 Edge T-Mobile Galaxy S6 Edg HOT 2 Original Android LG K10 Themes, Apps an Xiaomi Redmi 3 Questio Huawei P9 Plus Questio Micromax Canvas Knight Huawei Ascend G7 Guide Honor 8 Guides, News,
0コメント